WAC Lighting HR-LED271R-27-GM LEDme Mini 2-Inch Recessed Downlight - Open Reflector - Square Trim Remote Transformer, 2700K

Ledme miniature square recessed task light 2700K Warm White in Gunmetal. Perfect for ceilings, under cabinet and wall niches. LED miniature recessed down lights offer a super low profile and die cast aluminum trim with a 25° cutoff angle for comfortable general and task lighting.. die cast aluminum construction trim, available in multiple finish options. Black solid steel housing included. LED lamp and insulated wires are pre-installed within housing, wires lead out through the side of the housing for connection to remote DRIVER. Two heavy gauge inner retention clips push out onto mounting surface to firmly hold fixture in place. Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-ic ceiling applications. Sold as new construction, may be re-configured as a remodel on the field. Remote (ld-700ma03-edim-is, or ld-700ma09-edim-is)or plug-in (led-700ma12-p) DRIVER required and sold separately. Up to 3 fixtures can be installed on a 9W remote DRIVER. Available in adjustable, down light, round, and square trims. Smooth and continuous dimming to 10% with an electronic low voltage (elv) dimmer. High powered LED: color temperature: 2700K, 3000K, 3500K, or 4500K, rated hours: 100,000, voltage: 12V, power 3W, comparable to a 20W Mr11. Standards: UL, cul listed for damp locations.

• Die Cast aluminum construction trim. Black solid Steel housing included. LED lamp and insulated wires pre-installed within housing
• Accommodates surface up to 3/4in thickness and 2.5in cutout. Approved for use in non-ic Ceiling applications. Sold as new construction, may be re-configured as a remodel on the field
• Remote (ld-700ma03-edim-is, or ld-700ma09-edim-is)or plug-in (led-700ma12-p) Driver required and sold separately. Up to 3 Fixtures can be installed on a 9W remote Driver
• Smooth and continuous dimming to 10% with an electronic low Voltage (elv) dimmer
• High powered LED: color temperature: 2700K, 3000K, 3500K, or 4500K, rated hours: 100,000, Voltage: 12V, power 3W, comparable to a 20W MR11. Standards: UL, CUL listed for Damp locations
• Aperture: 1" - Cutout: 2 1/2"
• Remote drivers must be ordered separately - May be dimmed with eletronic low voltage (ELV) dimmer and dimmable driver
• 25Degree cutoff angle for comfortable general and task lighting - Narrow flood beam spread
• 2700K Color Temperature
• Gun Metal Finish