Tungsten Carbide Micro Drill Bits Set,Pin Vise Hand Micro Drill Bits Set,Precision Mini Drill Set Rotary Toolt for Print Circuit Board,Amber,Beeswax,Jewelry,CNC Punching Engraving,37 Pieces

Specification:hand drill bit:size:95 x 15 x 6mmMaterial:aluminum alloyRrills:HHS and Tungsten carbidePackage Include:1 x Hand Twist Drill1 x Black bench viseDrill5 x 0.5mm5 x 0.6mm3 x 1.0mm2 x 1.2mm2 x 1.5mm2 x 1.8mm2 x 2.0mm2 x 2.35mm2 x 3.0mmPCB drill:1 x 0.3mm1 x 0.4mm1 x 0.5mm1 x 0.6mm1 x 0.7mm1 x 0.8mm1 x 0.9mm1 x 1.0mm1 x 1.1mm1 x 1.2mm1 x 0.3mm1 x 0.4mm1 x 0.5mm1 x 0.6mm1 x 0.7mm1 x 0.8mm1 x 0.9mm1 x 1.0mm1 x 1.1mm1 x 1.2mmHow to use the hand twist drill:1.Choose the twist drill bit.2.Place the drill clamp into the drill3.Screw it on and adjust it to the tightness of the drill4.Install the selected drillNote:1.When drilling the hole,it should be in a vertical direction.Do not use too much force.Slowly twist the hole in one direction by hand.The needle cannot be broken or pried,otherwise it is easy to damage.2.It cannot be clamped on a hand drill to rotate at high speed.This way the amber will collapse.3.For the punching type,please pay attention to clean the surrounding powder while rotating.4.Grasp the tail of the drill bit by hand and slowly rotate and drill.When it is about to get through,pay special attention to reducing the speed and strength.5.If the needle feels tight when it rotates,please withdraw the needle and clean the hole and re-enter the powder.The positioning ring has multiple colors and is assembled randomly,so there is no guarantee that the color of each box will be the same.Please refer to the actual product.

• 1. The hand drill bit is made of high-end aluminum alloy,which is light and soft,with good strength and not easily deformed.Durable and long service life.The lower part of the twist drill handle has a diamond-shaped pattern and scales,which can prevent the hand from sweating and cause slippage,and avoid hurting the hand or breaking the drill.
• 2. The size of the hand drill bit is 95 x 15 x 6mm,chuck clamping range is 0.3-3.2mm.The size of the vise is 65 x 50 x 25mm,the maximum clamping distance is about 65mm.
• 3. Drill bits set,model includes 0.3mm,0.4mm,0.5mm,0.6mm,0.7mm,0.8mm,0.9mm,1.0mm,1.1mm,1.2mm,1.5mm,1.8mm,2.0mm,2.35mm,3.0mm.
• 4. Many kinds of drill bits of different sizes can meet your different needs.The compact manual drill is suitable for storage in a toolbox or pocket,which is easy to carry and store,bringing more convenience to your daily work.
• 5. Twist drill and PCB drill bits are light in weight and do not take up extra space.They can be used to process wood,plastic,rubber,PVC,walnut,model,bone,angle,amber,olive,fiberglass and other materials,but not suitable for iron,steel,stone and other hard materials.