Seamax Repair Kit for Inflatable Boats, Professional PVC Version with 2 Part Glue (250ml Glue & 25ml Hardener)

OPTIMAL USE: For the best results when gluing, the relative humidity should be less than 60% and ambient air temperature should be between 18C to 25C (65 F to 77F) and not in direct sunlight. Clean the patching area on the boat as well as the contact side of the patch, it is best to use M.E.K. (Methyl Ethel Ketone) patching solvent and cleaner. WARNING: Product Content Polyurethane. M.E.K. Harmful if inhaled; eye irritations. May cause sensitization if inhaled. Repeated exposure may cause skin dryness and cracking; Keep away from sources of ignition-No smoking; Don’t breathe vapor / spray. In case of contact with eyes, rinse immediately with plenty of fresh water & seek medical attention. Use Only in well-ventilated areas. Don’t smoke or work near open flames, sparks or other heat sources. STORAGE: Glue and all chemical materials are dangerous goods. Keep out of Reach of Children. Store in a cool and safe spot and keep the product quality for up to 3 years.

• Package provides 2 part glue. Mix 5% hardener into the glue before use. Max mix 10% hardener when in Cold Weather 10C-15C or when High Humidity 50-75%.
• For the best results when gluing, the relative humidity should be less than 60%, ambient air temperature should be between 18C to 25C (65 F to 77F) and not in direct sunlight. Clean the patching area on the boat as well as the contact side of the patch, best to be with M.E.K. (Methyl Ethel Ketone) patching solvent and cleaner. Keep solvent off skin. After applying the solvent, you will notice that the area will become tacky. This tackiness ensures good glue adhesion.
• We suggest using small painting blush to apply 2layers glue in both surface, wait 5-10 minutes to dry and attach those layers together with pressure. Wait 48 hours before boating.
• Store the Glue in cold place. Keep out of Reach of Children. Product has 2 years limited warranty.
• Only mix the amount of glue you require for the repair. Seal the bottle right away and store it in a cool area so that it may be used again. If the hardener turns to crystals or gets sticky, it is no longer usable. To clean the area that needs to be repaired, use Methyl Hydrate, Acetone or MEK